Product name：New two in one polishing machine
|
| Model：JL-PP-2in1 | 机器规格(cm)：300×45×160 |
| Total power:6KW | Average power consumption:2-3kwh/km |
| Voltage：380V | Average yield:800-1200 Y/H |
Material of equipment
| ① Special copper plated steel wire brush ② special thousand page polishing wheel ③ imported electrical components ④ precision regulator ⑤ brand motor and frequency converter |
Two way polishing system
| ※12 3000 rpm 1000 page polishing wheels are rough in the positive and negative directions first and then fine polished, and the surface of chain teeth is removed to achieve the smooth effect.
※ 8 polishing wheels of 4000 rpm shall be rough first and then fine polished in the positive and negative directions to remove the sharp angles on both sides of the chain teeth. After polishing, the surface of zipper is smooth to lay a solid foundation for the plating color at the back, ensuring the output and quality. |
Flatting system
| Flatten to ensure tooth thickness.
|
Special tool
| Use special tools to adjust the distance between zipper and brush, easy to operate, no dirty hands.
|
Precision regulation system
| Directly adjust the distance between the zipper and the steel brush outside the case, the accuracy can reach 0.04mm, and the operation is simple without dirty hands.
|
Copper powder recovery system
| With high suction design, a large amount of copper powder can be recycled to ensure the cleanness of cloth belt.
|
Belt alignment system
| Patent correction wheel, automatic correction deviation zipper.
|
| purpose | It is often used for polishing the tooth surface of various metal zippers.
|
Difference from similar products
| It is suitable for surface polishing of common teeth, corn teeth, double point teeth and Y teeth. First remove the knife mark on the chain tooth surface through the thousand page wheel, and then use the steel wire polishing wheel to round the sharp angle of the tooth edge, so as to make the zipper more smooth and high-end. |